CORPUS K

Lia R.
121 words 0 learners

Learn words with Flashcards and other activities

Definition First极速168赛车 377936e02ce27ce724b98272ce20c0e0
Print Flashcards极速168赛车 902a441ff479f3adacbe4135eb3a3334

Other learning activities

Answer a few questions about each word. Use this to prep for your next quiz! Compete with other teams in real time to see who answers the most questions correctly! Test your spelling acumen. Read the definition, listen to the word and try spelling it!

Teaching tools

Create and assign quizzes to your students to test their vocabulary. Assign learning activities including Practice, Vocabulary Jams and Spelling Bees to your students, and monitor their progress in real-time.

Full list of words from this list:

words only definitions & notes
  1. viscometer
    a measuring instrument for measuring viscosity
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  2. nonmandatory
    not required by rule or law
    It is characterized by the verbal form “should” and equivalent expressions such as “it is recommended that...” and “ought to...” (verbs of a nonmandatory nature).
  3. homogenize
    make uniform or consistent throughout
    The components A and B, when examined regarding sedimentations, at most, may present an easily homogenized bottom (manually).
  4. relative humidity
    the ratio of the amount of water in the air at a given temperature to the maximum amount it could hold at that temperature; expressed as a percentage
    Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
  5. ethyl
    the univalent hydrocarbon radical C2H5 derived from ethane by the removal of one hydrogen atom
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  6. silicate
    a salt or ester derived from silicic acid
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  7. for all intents and purposes
    in every practical sense
    In case of doubt, the Portuguese version, which is the valid document for all intents and purposes, shall be used.
  8. component
    one of the individual parts making up a larger entity
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  9. homogenized
    made homogeneous
    The components A and B, when examined regarding sedimentations, at most, may present an easily homogenized bottom (manually).
  10. spray gun
    an applicator resembling a gun for applying liquid substances (as paint) in the form of a spray
    The panels shall be painted preferentially by spray gun.
  11. substrate
    the material that is acted upon by an enzyme
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  12. pigment
    dry coloring material
    Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity; ASTM D 2371 - Standard Test Method for Pigment
  13. alphanumeric
    of or pertaining to alphanumeric characters
    Proposed revisions to this Standard shall be submitted to the CONTEC - Authoring Subcommittee, indicating the alphanumeric identification and revision of the Standard, the clause(s) to be revised, the proposed text, and technical/economic justification for revision.
  14. room temperature
    the normal temperature of room in which people live
    e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
  15. requirement
    necessary activity
    CONTEC Comissão de Normalização Técnica Technical Requirement: a provision established as the most adequate and which shall be used strictly in accordance with this Standard.
  16. viscosity
    resistance of a liquid to flowing
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  17. preferentially
    in a preferential manner
    The panels shall be painted preferentially by spray gun.
  18. zinc
    a bluish-white lustrous metallic element
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  19. carbon steel
    steel whose characteristics are determined by the amount of carbon it contains
    The paint shall be applied directly on the AISI-1020 carbon steel plate.
  20. manually
    by hand
    The components A and B, when examined regarding sedimentations, at most, may present an easily homogenized bottom (manually).
  21. consistence
    a harmonious uniformity or agreement among things or parts
    65 to 75 - 20 ASTM D 1640 Pressure Drying Time, h 65 to 75 - 2 ASTM D 1640 Contents of Pigments, % - 60 - ASTM D 2371 Pot Life of the Mixture, h - 2 - ABNT NBR 15742 Consistence, UK - 60 70 ASTM D 562 -PUBLICN- 2231 REV.
  22. agglomerate
    form into one cluster
    3 GENERAL CONDITIONS 3.1 Appearance of Component A Zinc and aluminum (component A) shall have the appearance of a dispersion, free of agglomerates and presented in the form of a paste.
  23. coating
    a thin layer covering something
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  24. Salina
    a town in central Kansas
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  25. reducible
    capable of being reduced
    Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity; ASTM D 2371 - Standard Test Method for Pigment Content of Solvent-Reducible
  26. humidity
    wetness in the atmosphere
    Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
  27. standard
    a basis for comparison
    D, incorporated the 1st Amendment, and it is used to alter the text of the Standard in the parts indicated below: NOTE 1 The news pages with the performed amendments are placed in its corresponding positions.
  28. liter
    a metric unit of capacity; equal to 1,000 cubic centimeters
    4 3.6 Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the
  29. Min
    any of the forms of Chinese spoken in Fukien province
    TABLE 1 - REQUIREMENTS REGARDING THE PRODUCT READY TO USE Requirement Tests s Thickness of the Dry Film ( m) Min.
  30. aluminum
    a silvery, flexible, metallic element
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  31. saline
    containing salt
    Saline Mist, h 65 to 75 480 - ABNT NBR 8094 Resistance to 100 % of Relative Humidity, h 65 to 75 480 - ASTM D 2247 % Metallic Zn in the Dry Film, in Mass - 75 - (see Note) Note: The contents of metallic zinc in the dry film shall be calculated based on the following ratio: NVM (m m ) m x Zn x P Zn a b a 0 1 a   Where: Zn1 = % of metallic zinc in the dry film; Zn0 = % of metallic zinc in the pigment; Pa = % of pigments in component A (according to ASTM D 2371); NVM = % of non-volatile
  32. paint
    a substance used as a coating to protect or decorate a surface (especially a mixture of pigment suspended in a liquid); dries to form a hard coating
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  33. foreword
    a short introductory essay preceding the text of a book
    Foreword PETROBRAS Technical Standards are prepared by Working Groups - WG (consisting of specialists from PETROBRAS and its Subsidiaries), are commented by PETROBRAS Units and PETROBRAS Subsidiaries, are approved by the Authoring Subcommittees - SCs (consisting of specialists from the same specialty, representing the various PETROBRAS Units and PETROBRAS Subsidiaries), and ratified by the Executive Nucleus (consisting of representatives of the PETROBRAS Units and PETROBRAS Subsidiaries).
  34. issuance
    the act of providing an item for general use or for official purposes (usually in quantity)
    1.2 The paint is intended for the anticorrosive protection of surfaces that are subject to temperatures up to 500 °C. 1.3 This Standard is applicable to procedures started as from the date of issuance.
  35. discolor
    cause to lose or change hue
    The panels shall be visually inspected after the exposure to each level of temperature, verifying the existence or lack of the following imperfections: peeling, cracking, blisters, irregular discolor and loss of adherence.
  36. steel plate
    a plate of steel
    The paint shall be applied directly on the AISI-1020 carbon steel plate.
  37. Mass
    a sequence of prayers constituting the Christian Eucharistic rite
    Standards to Use Specific Mass, g/cm3 - 1.90 - ASTM D 1475 Solids per Mass, % - 65 - PETROBRAS N-1367 Touch Dry Time, min.
  38. white metal
    an alloy (often of lead or tin base) used for bearings
    The preparation of the surface shall be carried out by means of blasting to white metal, grade Sa-3 of ISO standard 8501-1.
  39. corrosive
    capable of destroying or eating away by chemical action
    Upon observing the panels, there should not be any blisters or corrosive points on the surface, nor penetration on the notch after the end of 480 h, of the saline mist test. 4.3.2
  40. verify
    confirm the truth of
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  41. name and address
    written directions for finding some location
    4 3.6 Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the
  42. dilute
    lessen the strength or flavor of a solution or mixture
    3.5 Dilution When necessary and in order to make the application easier, this paint can be diluted according to the instructions of the manufacturer.
  43. test
    standardized procedure for measuring sensitivity or aptitude
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  44. revision
    the act of altering
    D ENGLISH MAY / 2007 PROPERTY OF PETROBRAS 7 pages and Index of Revisions PAINT OF ETHYL - SILICATE OF ZINC - ALUMINUM Specification This Standard replaces and cancels its previous revision.
  45. min
    a unit of time equal to 60 seconds or 1/60th of an hour
    Standards to Use Specific Mass, g/cm3 - 1.90 - ASTM D 1475 Solids per Mass, % - 65 - PETROBRAS N-1367 Touch Dry Time, min.
  46. write on
    write about a particular topic
    4 3.6 Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the
  47. subcommittee
    a small working group that is part of a larger group
    The CONTEC - Authoring Subcommittee provides guidance on the interpretation of this Standard when questions arise regarding its contents.
  48. solvent
    capable of meeting financial obligations
    D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity; ASTM D 2371 - Standard Test Method for Pigment Content of Solvent
  49. metallic
    containing or made of or resembling or characteristic of a metal
    Relative Humidity, h 65 to 75 480 - ASTM D 2247 % Metallic Zn in the Dry Film, in Mass - 75 - (see Note) Note: The contents of metallic zinc in the dry film shall be calculated based on the following ratio: NVM (m m ) m x Zn x P Zn a b a 0 1 a   Where: Zn1 = % of metallic zinc in the dry film; Zn0 = % of metallic zinc in the pigment; Pa = % of pigments in component A (according to ASTM D 2371); NVM = % of non-volatile components per mass in the paint (solid components per mass, according to
  50. verifying
    serving to support or corroborate
    The panels shall be visually inspected after the exposure to each level of temperature, verifying the existence or lack of the following imperfections: peeling, cracking, blisters, irregular discolor and loss of adherence.
  51. blister
    an elevation of the skin filled with fluid
    Upon observing the panels, there should not be any blisters or corrosive points on the surface, nor penetration on the notch after the end of 480 h, of the saline mist test. 4.3.2
  52. working group
    a group of people working together temporarily until some goal is achieved
    Foreword PETROBRAS Technical Standards are prepared by Working Groups - WG (consisting of specialists from PETROBRAS and its Subsidiaries), are commented by PETROBRAS Units and PETROBRAS Subsidiaries, are approved by the Authoring Subcommittees - SCs (consisting of specialists from the same specialty, representing the various PETROBRAS Units and PETROBRAS Subsidiaries), and ratified by the Executive Nucleus (consisting of representatives of the PETROBRAS Units and PETROBRAS Subsidiaries).
  53. rev
    rate of revolution of a motor
    N-2231 REV.
  54. product
    an artifact that has been created by someone or some process
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  55. mesh
    an open fabric woven together at regular intervals
    When component A, is analyzed regarding retention in mesh of 45 m, the contents of coarse particles can not exceed 3 %. 4.1.2
  56. mixture
    a collection containing a variety of sorts of things
    Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the mixture
  57. recipient
    a person to whom something is sent, given, or awarded
    The recipients that contain the components of this paint shall be in good conditions of conservation and be properly labeled or marked on the side surface according to the requirements of this Standard and PETROBRAS standard N-1288. 3.3.2
  58. panel
    sheet that forms a distinct section of something
    Upon observing the panels, there should not be any blisters or corrosive points on the surface, nor penetration on the notch after the end of 480 h, of the saline mist test. 4.3.2
  59. pursuant
    in conformance to or agreement with
    - PETROBRAS, for internal use in the Company, and any reproduction for external use or disclosure, without previous and express authorization from the owner, will imply an unlawful act pursuant to the relevant legislation through which the applicable responsibilities shall be imputed.
  60. cool down
    make cool or cooler
    After the end of the high temperature exposure, the panels of the stove shall be removed and cooled down abruptly by placing them under water jet at room temperature.
  61. contain
    hold or have within
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  62. retention
    the act of keeping something
    When component A, is analyzed regarding retention in mesh of 45 m, the contents of coarse particles can not exceed 3 %. 4.1.2
  63. valid
    well grounded in logic or truth or having legal force
    In case of doubt, the Portuguese version, which is the valid document for all intents and purposes, shall be used.
  64. film
    a series of moving pictures that tells a story
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  65. accord
    concurrence of opinion
    The recipients that contain the components of this paint shall be in good conditions of conservation and be properly labeled or marked on the side surface according to the requirements of this Standard and PETROBRAS standard N-1288. 3.3.2
  66. supplementary
    functioning in a supporting capacity
    2 SUPPLEMENTARY DOCUMENTS The documents listed below are mentioned in the text and contain valid requirements for the present Standard.
  67. contents
    a list of divisions and the pages on which they start
    The CONTEC - Authoring Subcommittee provides guidance on the interpretation of this Standard when questions arise regarding its contents.
  68. corrosion
    erosion by chemical action
    There should not be any points of corrosion of steel, nor formation of blisters in the dry film after the established time for the test of resistance at 100 % of relative humidity. 4.3.3
  69. particle
    (nontechnical usage) a tiny piece of anything
    When component A, is analyzed regarding retention in mesh of 45 m, the contents of coarse particles can not exceed 3 %. 4.1.2
  70. verified
    proved to be true
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  71. dry
    free from liquid or moisture
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  72. time limit
    a time period within which something must be done or completed
    It is required the renew of this time limit of use for 2 additional periods of 3 months by means of repetition and prior approval of the tests performed upon the supply.
  73. confidentiality
    discretion in keeping secret information
    External circulation shall be regulated by a specific clause of Secrecy and Confidentiality pursuant to the terms of intellectual and industrial property law.”
  74. curing
    the process of becoming hard or solid by cooling or drying or crystallization
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  75. subsidiary
    functioning in a supporting capacity
    Foreword PETROBRAS Technical Standards are prepared by Working Groups - WG (consisting of specialists from PETROBRAS and its Subsidiaries), are commented by PETROBRAS Units and PETROBRAS Subsidiaries, are approved by the Authoring Subcommittees - SCs (consisting of specialists from the same specialty, representing the various PETROBRAS Units and PETROBRAS Subsidiaries), and ratified by the Executive Nucleus (consisting of representatives of the PETROBRAS Units and PETROBRAS Subsidiaries).
  76. dilution
    a solution reduced in strength or concentration
    3.5 Dilution When necessary and in order to make the application easier, this paint can be diluted according to the instructions of the manufacturer.
  77. technical
    of or relating to aptitude in a practical skill
    CONTEC Comissão de Normalização Técnica Technical Requirement: a provision established as the most adequate and which shall be used strictly in accordance with this Standard.
  78. thickness
    the dimension through an object as opposed to its length or width
    TABLE 1 - REQUIREMENTS REGARDING THE PRODUCT READY TO USE Requirement Tests s Thickness of the Dry Film ( m) Min.
  79. temperature
    the degree of hotness or coldness of a body or environment
    1.2 The paint is intended for the anticorrosive protection of surfaces that are subject to temperatures up to 500 °C. 1.3 This Standard is applicable to procedures started as from the date of issuance.
  80. document
    a representation of a person's thinking with symbolic marks
    In case of doubt, the Portuguese version, which is the valid document for all intents and purposes, shall be used.
  81. identification
    the act of designating something
    Proposed revisions to this Standard shall be submitted to the CONTEC - Authoring Subcommittee, indicating the alphanumeric identification and revision of the Standard, the clause(s) to be revised, the proposed text, and technical/economic justification for revision.
  82. amendment
    a statement that is added to a proposal or document
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
  83. analyzed
    examined carefully and methodically
    When component A, is analyzed regarding retention in mesh of 45 m, the contents of coarse particles can not exceed 3 %. 4.1.2
  84. calculate
    make a mathematical computation
    D ENGLISH MAY / 2007 5 Notes: 1) The contents of pigments in the mixture shall be calculated according to the following formula: a b a a m m m m x P % P   Where: Pa = % of pigments in component A; ma = mass of component A; mb = mass of component B indicated in the proportion of the mixture.
  85. revise
    make changes to
    Proposed revisions to this Standard shall be submitted to the CONTEC - Authoring Subcommittee, indicating the alphanumeric identification and revision of the Standard, the clause(s) to be revised, the proposed text, and technical/economic justification for revision.
  86. analyze
    break down into components or essential features
    When component A, is analyzed regarding retention in mesh of 45 m, the contents of coarse particles can not exceed 3 %. 4.1.2
  87. dec
    (astronomy) the angular distance of a celestial body north or to the south of the celestial equator; expressed in degrees; used with right ascension to specify positions on the celestial sphere
    C DEC/2001, the contents thereof not altered.
  88. expiration
    a coming to an end of a contract period
    4 3.6 Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the
  89. well-founded
    based on sound reasoning or evidence
    If a decision is taken not to follow the requirement (“non-conformity” to this Standard) it shall be based on well-founded economic and management reasons, and be approved and registered by the Department of PETROBRAS that uses this Standard.
  90. density
    the amount per unit size
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  91. define
    show the form or outline of
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  92. visually
    with respect to sight
    The panels shall be visually inspected after the exposure to each level of temperature, verifying the existence or lack of the following imperfections: peeling, cracking, blisters, irregular discolor and loss of adherence.
  93. mass
    the property of a body that causes it to have weight
    The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the mixture in mass
  94. specification
    the act of naming explicitly
    D ENGLISH MAY / 2007 PROPERTY OF PETROBRAS 7 pages and Index of Revisions PAINT OF ETHYL - SILICATE OF ZINC - ALUMINUM Specification This Standard replaces and cancels its previous revision.
  95. item
    a distinct part that can be specified separately in a group
    4.3 Characteristics of the Dry Film The characteristics of the dry film are established in TABLE 2 and items 4.3.1 to 4.3.3.
  96. characterize
    be typical of
    It is characterized by the verb forms “shall,” “it is necessary...,” “is required to...,” “it is required that...,” “is to...,” “has to...,” “only ... is permitted,” and other equivalent expressions having an imperative nature.
  97. high temperature
    the presence of heat
    After the end of the high temperature exposure, the panels of the stove shall be removed and cooled down abruptly by placing them under water jet at room temperature.
  98. dimension
    a construct distinguishing objects or individuals
    The dimensions of the plate shall be 150 mm x 80 mm, and minimum thickness of 2 mm. 5.2.2.2
  99. recommend
    express a good opinion of
    Recommended Practice: a provision that may be adopted under the conditions of this Standard, but which admits (and draws attention to) the possibility of there being a more adequate alternative (not written in this Standard) to the particular application.
  100. applicable
    having relevance
    - PETROBRAS, for internal use in the Company, and any reproduction for external use or disclosure, without previous and express authorization from the owner, will imply an unlawful act pursuant to the relevant legislation through which the applicable responsibilities shall be imputed.
  101. content
    satisfied or showing satisfaction with things as they are
    The CONTEC - Authoring Subcommittee provides guidance on the interpretation of this Standard when questions arise regarding its contents.
  102. manufacturer
    someone who constructs or produces something
    3.5 Dilution When necessary and in order to make the application easier, this paint can be diluted according to the instructions of the manufacturer.
  103. label
    a brief description given for purposes of identification
    The recipients that contain the components of this paint shall be in good conditions of conservation and be properly labeled or marked on the side surface according to the requirements of this Standard and PETROBRAS standard N-1288. 3.3.2
  104. at most
    not more than
    The components A and B, when examined regarding sedimentations, at most, may present an easily homogenized bottom (manually).
  105. indicate
    designate a place, direction, person, or thing
    D, incorporated the 1st Amendment, and it is used to alter the text of the Standard in the parts indicated below: NOTE 1 The news pages with the performed amendments are placed in its corresponding positions.
  106. specific
    stated explicitly or in detail
    External circulation shall be regulated by a specific clause of Secrecy and Confidentiality pursuant to the terms of intellectual and industrial property law.”
  107. notch
    a small cut
    Upon observing the panels, there should not be any blisters or corrosive points on the surface, nor penetration on the notch after the end of 480 h, of the saline mist test. 4.3.2
  108. relate
    give an account of
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  109. characteristic
    typical or distinctive
    1 SCOPE 1.1 This Standard defines the characteristics that can be verified in laboratory and are required for the supply of ethyl-silicate of zinc-aluminum paint shipped in 2 cans: 1 containing zinc and aluminum (component A) and the other one the solution of ethyl-silicate (component B).
  110. minimum
    the smallest possible quantity
    The dimensions of the plate shall be 150 mm x 80 mm, and minimum thickness of 2 mm. 5.2.2.2
  111. resistance
    any mechanical force that tends to slow or oppose motion
    ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance
  112. thermal
    relating to or associated with heat
    For the verification of the resistance of the dry film to thermal shock, a test shall be performed according to item 5.2.2.4 after the end of 7 d of application of the paint on the panels.
  113. consistency
    uniformity or stability in arrangement, behavior, or quality
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  114. method
    a way of doing something, especially a systematic way
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  115. authorization
    official permission or approval
    - PETROBRAS, for internal use in the Company, and any reproduction for external use or disclosure, without previous and express authorization from the owner, will imply an unlawful act pursuant to the relevant legislation through which the applicable responsibilities shall be imputed.
  116. peeling
    loss of bits of outer skin by peeling or shedding or coming off in scales
    The panels shall be visually inspected after the exposure to each level of temperature, verifying the existence or lack of the following imperfections: peeling, cracking, blisters, irregular discolor and loss of adherence.
  117. storage
    the act of keeping something for future use
    The packing of component B (ethyl-silicate solution) shall be appropriate to maintain the characteristics of the product unchanged during storage. 3.2.3
  118. marking
    a distinguishing symbol
    4 3.6 Marking The label or the body of the recipients shall give, at least, the following information that can not be written on the lid: a) PETROBRAS standard N-2231; b) ethyl-silicate of zinc aluminum paint; c) identification of the components: A or B; d) diluting agent to be used; e) quantity contained in the recipient, in liters and kg; f) name and address of the manufacturer; g) identifying number or signal of the manufactured lot; h) expiration date of the product; i) proportion of the
  119. relative
    not absolute or complete
    of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature; ASTM D 2247 - Standard Practice for Testing Water Resistance of Coatings in 100 % Relative
  120. pot
    metal or earthenware cooking vessel that is usually round and deep; often has a handle and lid
    Exposição à Nevoa Salina; ABNT NBR 15742 - Tintas e Vernizes - Determinação de Vida Útil da Mistura (“Pot-Life”); ISO 8501 - 1 - Preparation of Steel Substrates Before Application of Paints and Related Products; ASTM D 562 - Standard Test Methods for Consistency of Paints Measuring Kreg Uni (KU) Viscosity using a Stormer-Type Viscometer; ASTM D 1475 - Standard Test Method for Density of Liquid Coatings, Inks and Related Products; ASTM D 1640 - Standard Test Methods for Drying, Curing, or Film
  121. coat
    an outer garment that covers the body from shoulder down
    D ENGLISH 11 / 2012 PROPERTY OF PETROBRAS 1 page Paint of Ethyl - Silicate of Zinc - Aluminum CONTEC Comissão de Normalização Técnica SC-14 Paintwork Anticorrosive Coatings 2nd Amendment This is the 2nd Amendment to PETROBRAS N-2231 REV.
Created on 二月 20, 2013

Sign up now (it’s free!)

Whether you’re a teacher or a learner 全国统一开奖网址, soonshin.com can put you or your class on the path to systematic vocabulary improvement.